Dosage and Administration

Regener-Eyes® Ophthalmic Solution, Professional Strength and LITE: Instill one or two drops in the affected eye(s) as needed or as recommended by your Eye Care Professional (ECP).

Contact lenses should be removed before Regener-Eyes® Professional Strength and LITE products are administered. 

The tip of the vial should not touch any surfaces, including the eye, to avoid contamination of the products or injury to the eye. Following each use, the screw cap should be placed on the vial and twisted to seal the ophthalmic solution vial. 

Regener-Eyes is listed with the FDA and manufactured in a facility that is registered and inspected by the FDA.

FAQs

Is Regener-Eyes FDA Approved?

Regener-Eyes is listed with the FDA and manufactured in a facility that is registered and inspected by the FDA. With an FDA indication for use as a lubricant to prevent further irritation or to relieve dryness of the eye.

What is Regener-Eyes® Ophthalmic Solution?

Regener-Eyes® Ophthalmic Solution is an OTC Monograph Drug.

Regener-Eyes® is used to provide temporary relief of burning and irritation due to dryness of the eye.

Each product is preservative-free and can be used as a protectant against further irritation or to relieve dryness of the eye.

What is the shelf life of Regener-Eyes® Professional Strength and Regener-Eyes® LITE products?

Regener-Eyes® Ophthalmic Solution, Professional Strength can be stored at room temperature. Once opened, each bottle can continue to be stored at room temperature. Regener-Eyes® Ophthalmic Solution, Professional Strength has a shelf life of two (2) years from the manufacture date, when stored at room temperature if unopened.

Regener-Eyes® Ophthalmic Solution, LITE can be stored at room temperature. Once opened, each bottle can continue to be stored at room temperature. Regener-Eyes® Ophthalmic Solution, LITE has a shelf life of two (2) years from the manufacture date, when stored at room temperature if unopened. 

How should I use Regener-Eyes® Professional Strength and LITE products?

For either product, instill one or two drops in the affected eye(s) as needed, or as recommended by your Eye Care Professional (ECP).

The tip of the vial should not touch any surfaces, including the eye, to avoid contamination of the products or injury to the eye. Following each use, the screw cap should be placed on the vial and twisted to seal the ophthalmic solution vial. 

Can I use Regener-Eyes® Professional Strength and LITE products if I wear contact lenses?

Contact lenses should be removed before Regener-Eyes® Professional Strength and LITE products are administered.  

Can I use Regener-Eyes® Professional Strength and LITE products if I wear scleral lenses?

It is up to your Eye Care Professional (ECP).Â